Sie sind hier : Startseite →  Technik und Wissen→  Das (Data-) Band→  LTO Spezifikationen 1

Die Spezifikationen des 100Giga LTO Ultrium 1 Bandes:

High-recording density is a crucial factor in tape capacity. Fujifilm draws on its long experience in precision manufacturing and has developed tapes with up to 200GB (2:1 compression; 100GB native) capacity on a single cartridge, meeting the needs of the most demanding applications.

 

Fujifilm's patented ATOMM technology incorporates a unique ultra-thin dual-coating system that contributes to the remarkable durability and stability of LTO Ultrium data cartridges. The tape also incorporates an improved PEN* basefilm that is very stable under environmental change - an important consideration in a medium which has been designed to withstand years of heavy daily use and extended archival storage.

*PEN=Polyethylene Naphthalate

 

Increased performance (measured by higher transfer speeds) means less time spent on backups and archive operations, and greater overall efficiency. LTO Ultrium data cartridges deliver impressive data transfer rates of 40-80MB/s (2:1 compressed; 20-40MB/s native).

 

LTO stands for "Linear Tape-Open" Technology - a new open-standard specification designed to address the needs of mid-range tape backup applications. The standard was developed by a consortium of Hewlett-Packard Company, IBM Corporation, and Seagate Inc.-and it represents a scalable and durable tape-storage format whose future growth (going all the way up to 1.6TB (2:1 compressed; 800GB native) configurations) has been mapped out:

 

Die Planung für LTO Ultrium Bänder (ältere Version)

LTO ROADMAP

1st Generation

2nd Generation

3rd Generation

4th Generation

CAPACITY

200 GB (compressed)

400 GB (compressed)

800 GB (compressed)

1.6 TB (compressed)

netto!!

100 GB (native)

200 GB (native)

400 GB (native)

800 GB (native)

MAXIMUM TRANSFER RATE

40 MB/s (compressed)

80 MB/s (compressed)

160 MB/s (compressed)

320 MB/s (compressed)

20 MB/s (native)

40 MB/s (native)

80 MB/s (native)

160 MB/s (native)

Neuere Informationen in Kürze

Die von Fujifilm angebotenen Ultrium 1 Bänder

RECORDING CAPACITY netto / Type

100 GB

50 GB

30 GB

10 GB

RECORDING CAPACITY

100/200*GB

50/100*GB

30/60*GB

10/20*GB

TRANSFER RATE

10-20 MB/s / 20-40*MB/s

CARTRIDGE DIMENSIONS

102.0 x 105.4 x 21.5 mm

TAPE DIMENSIONS

-

LENGTH

609 m

319 m

203 m

87 m

WIDTH

12.65 mm

12.65 mm

12.65 mm

12.65 mm

WEIGHT

205 g

155 g

135 g

115 g

MAGNETIC TAPE

Advanced Metal Powder/ATOMM Technology**

RECORDING METHOD

Serpentine

TRACK DENSITY

384 track per tape width

OPERATING ENVIRONMENT

10-45° C, 10-80% RH, Wet Bulb max. 26° C

STORAGE ENVIRONMENT

16-32° C, 20-80% RH, Wet Bulb max. 26° C

TRANSPORTATION ENVIRONMENT

23-49° C, 5-80% RH, Wet Bulb max. 26° C

SERVO SYSTEM

Embedded (pre-recorded magnetic signal)

CARTRIDGE MEMORY

EEPROM

*Assumes 2:1 data compression.

**ATOMM dual-coating construction consists of a super-thin magnetic metal particle upper layer and a non-magnetic lower layer. Specifications subject to change.

***For specifications on the LTO Ultrium 1 Cleaning Cartridge, please contact your Fujifilm sales representative.

****Do not degauss LTO cartridges. Ultrium LTO cartridges are pre-recorded with a magnetic servo signal at the factory. This signal is required in order to use the cartridge with the Ultrium LTO drive. Keep magnetically charged objects out of close range.

 

- Werbung Dezent -
© 2001/2017 - Copyright by Dipl. Ing. Gert Redlich - Germany - Wiesbaden - Impressum und Museums-Telefon - zur RDE-Seite - NEU : Zum Flohmarkt